| | | |
|
ACANTO AT 1217 AT 1217 Pneumatic Actuated Plunger With Absolute Signal
|
|
ACANTO AT 1218 AT 1218 Spring Loaded Actuated Plunger With Absolute Signal
|
|
ACANTO AT 3017 AT 3018 Spring Loaded Actuated Plunger With Absolute Signal
|
|
ACANTO AT 3018 AT 3018 Spring Loaded Actuated Plunger With Absolute Signal
|
|
CS 200 CS200 is HEIDENHAIN`s best granite stand for use with Certo gauges
|
|
CT 2501 The CERTO CT 2501 is a Ultra High Accuracy Length Gauge which features a measuring range of 25 mm.
|
|
CT 2502 The CERTO CT 2502 is a Ultra High Accuracy Length Gauge which features a measuring range of 25 mm.
|
|
CT 6001 The CERTO CT 6001 is a Ultra High Accuracy Length Gauge which features a measuring range of 60 mm.
|
|
CT 6002 The CERTO CT 6002 is a Ultra High Accuracy Length Gauge which features a measuring range of 60 mm.
|
|
DA 400 Air Purge System The DA 400 is a compressed air filter system for purifying compressed air into encoders.
|
|
ECN 113 Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 1 Vpp and EnDat output and IP 64 protection
|
|
ECN 1313 Compact absolute rotary taper shaft encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat output and IP 40 protection
|
|
ECN 413 Compact absolute rotary encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat or SSI output and IP 64 protection
|
|
EIB 2391S Seimens Interface EIB 2391S converts a HEIDENHAIN absolute output signal from EnDat 2.2 to Seimens new DRIVE CLiQ
|
|
EQN 1325 Compact absolute rotary taper shaft encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat output and IP 40 protection
|
|
EQN 425 Compact absolute rotary encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat or SSI output and IP 64 protection
|
|
ERA 4280C (20um) Exposed modular angle encoder without integral bearing for measuring steps 0.005° to 0.0005° with 1Vpp Output. 20um grading period
|
|
ERA 4480 Exposed angle encoder without integral bearing for measuring steps 0.005° to 0.0005° with 1Vpp Output. Mechanically compatible with ERA180
|
|
ERA 4480C (40um) Exposed modular angle encoder without integral bearing for measuring steps 0.005° to 0.0005° with 1Vpp Output. 20um grading period
|
|
ERA 4880C (80um) Exposed modular angle encoder without integral bearing for measuring steps 0.005° to 0.0005° with 1Vpp Output. 20um grading period
|
|
ERA 780 / 780C Exposed angle encoder without integral bearing for high speed measuring steps 0.001° to 0.0001° with 1Vpp Output
|
|
ERA 880 / 880C Exposed angle encoder without integral bearing for measuring steps 0.001° to 0.0001° with 1Vpp Output
|
|
ERM 220 The robust ERM modular magnetic encoders are especially suited for use in production machines with accuracies between +/-4` and +/-14`.
|
|
ERM 2200 ERM 2200 Magnetic Encoders
|
|
ERM 280 The robust ERM modular magnetic encoders are especially suited for use in production machines with accuracies between +/-4` and +/-14`.
|
|
ERN 1020 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
|
|
ERN 1030 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 10v to 30v HTL Quadrature output and IP 64 protection
|
|
ERN 1080 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 64 protection
|
|
ERN 1085 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output plus commutation signals and IP 64 protection
|
|
ERN 1120 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 40 protection
|
|
ERN 1180 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 40 protection
|
|
ERN 1185 Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp and commutation signal output and IP 40 protection
|
|
ERN 120 Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
|
|
ERN 130 Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 10v to 30v HTL Quadrature output and IP 64 protection
|
|
ERN 1321 Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 40 protection
|
|
ERN 1326 Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature and commutation signal output and IP 40 protection
|
|
ERN 1381 Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 40 protection
|
|
ERN 1387 Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 1Vpp and commutation signal output and IP 40 protection
|
|
ERN 180 Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 1 Vpp output and IP 64 protection
|
|
ERN 420 Compact incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
|
|
ERN 430 Compact incremental rotary encoder with integral bearing and mounted stator coupling with 10v to 30v HTL Quadrature output and IP 64 protection
|
|
ERN 460 Compact incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
|
|
ERN 480 Compact incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 64 protection
|
|
ERN 620 Incremental modular rotary encoder with mounted stator coupling with 5v TTL Quadrature output and IP 40 protection.
|
|
ERN 630 Incremental modular rotary encoder with mounted stator coupling with 10v to 30v HTL Quadrature output and IP 40 protection.
|
|
ERN 650 Incremental modular rotary encoder with mounted stator coupling with 11uApp output and IP 40 protection.
|
|
ERN 680 Incremental modular rotary encoder with mounted stator coupling with 1Vpp output and IP 40 protection.
|
|
ERO 1225 Compact exposed incremental rotary encoder without integral bearing with 5v TTL Quadrature output
|
|
ERO 1285 Compact exposed incremental rotary encoder without integral bearing with 1Vpp output
|
|
ERO 1324 Exposed incremental rotary encoder for large shaft diameters without integral bearing with 5v TTL Quadrature output
|
|
ERO 1384 Exposed incremental rotary encoder for large shaft diameters without integral bearing with 1Vpp output
|
|
ERO 1420 Miniature exposed incremental rotary encoder without integral bearing
|
|
ERO 1421 Miniature exposed incremental rotary encoder without integral bearing with 5v TTL Quadrature output
|
|
ERO 1470 Miniature exposed incremental rotary encoder without integral bearing
|
|
ERO 1480 Miniature exposed incremental rotary encoder without integral bearing
|
|
ERO 1481 Miniature exposed incremental rotary encoder without integral bearing with 1Vpp output
|
|
ERO 785 ERO exposed angle encoder without integral bearing
|
|
Fadal Linear Scales Inventory of discontinued custom HEIDENHAIN scales for Fadal machines
|
|
HR 130 Panel-mounted handwheel with ergonomic control knob
|
|
HR 150 Panel-mounted handwheel with ergonomic control knob
|
|
HR 410 Portable electronic handwheel with Keys for the selection of 5 axes
|
|
HR 420 Portable electronic handwheel with Display for operating mode, actual position value, programmed feed rate and spindle speed, error messages
|
|
HR 550FS Wireless Handwheel New HR 550FS electronic handwheel from HEIDENHAIN is available for the iTNC 530
|
|
HRA 110 Handwheel adapter for connection of up to three HR 150 panel-mounted handwheels and two switches for axis selection and for selecting the interpolation factor.
|
|
IBV/EXE 101 Signal interpolation and converter
|
|
IBV/EXE 600 Signal interpolation and converter
|
|
IK 5000 QUADRA-CHEK The IK 5000 is a universal PC package solution for measuring machines requiring 2D and 3D measuring tasks.
|
|
KGM 181 The KGM Grid Encoder is for performing circular interpolation tests with small radii and curved path tests, to inspect primarily the dynamic performance of a control
|
|
KGM 282 Inspection Grid Encoder The new KGM 282 replaces the KGM 181/182 for machine tool inspection and acceptance testing with a higher accuracy grade
|
|
LB 382 / 382C Sealed Linear Encoders for Large Measuring Lengths with 1Vpp or TTL Quadrature Output
|
|
LC 115 (EnDat 2.2 Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 183 High positioning accuracy and traversing speed through single-field scanning
|
|
LC 185 (EnDat 2.2 Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 193F (Fanuc Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 193M (Mitsubishi Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 195F (Fanuc Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 195M (Mitsubishi Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 195S (Siemens Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 200 NEW LC 200 – Absolute Linear Encoder for Machine Tools with Long Axes up 28 meters
|
|
LC 200 (FANUC INTERFACE) NEW LC 200 – Absolute Linear Encoder for Machine Tools for Axes up 28 Meters Using FANUC Controls
|
|
LC 415 (EnDat 2.2 Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 483 Absolute linear encoders for measuring steps to 0.1 µm (resolution to 0.005 µm. For limited installation space. High positioning accuracy and traversing speed through single-field scanning.
|
|
LC 493F (Fanuc Interface) Absolute linear encoders for measuring steps to 0.1 µm (resolution to 0.005 µm).
|
|
LC 493M (Mitsubishi Interface) Absolute linear encoders for measuring steps to 0.1 µm (resolution to 0.005 µm).
|
|
LC 495F (Fanuc Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 495M (Mitsubishi Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LC 495S (Siemens Interface) High positioning accuracy and traversing speed through single-field scanning
|
|
LF 183 / 183C Sealed Linear Encoders for Measuring Steps to 0.1 µm with 1Vpp Output.
|
|
LF 483 / 483C Slimline Sealed Linear Encoders for Measuring Steps to 0.1 µm with 1Vpp Output
|
|
LIDA 171 / 171C Incremental linear encoders for high traversing speeds with 5v TTL Quadrature Output
|
|
LIDA 279/289 Steel tape incremental linear encoder with large mounting tolerance.
|
|
LIDA 473 / 473C Incremental linear encoders for high traversing speeds with TTL Output
|
|
LIDA 475 Incremental linear encoders for limited installation space, high traversing speeds, and long traverses up to 30m with TTL Output
|
|
LIDA 477 Incremental linear encoders for limited installation space, high traversing speeds, and medium traverses up to 6m with 5v TTL Quadrature Output
|
|
LIDA 483 / 483C Incremental linear encoders for high traversing speeds with 1 Vpp Output
|
|
LIDA 485 Incremental linear encoders for limited installation space, high traversing speeds, and long traverses up to 30m with 1Vpp Output
|
|
LIDA 487 Incremental linear encoders for limited installation space, high traversing speeds, and medium traverses up to 6m with 1Vpp Output
|
|
LIF 471 Incremental exposed linear encoder for measuring steps of 1 µm to 0.1 µm
|
|
LIF 481 Incremental exposed linear encoder for measuring steps of 1 µm to 0.1 µm
|
|
LIM 571 Incremental linear encoder for measuring steps of 10 µm. For limited installation space. For large measuring lengths. Magnetic scanning principle.
|
|
LIM 581 Incremental linear encoder for measuring steps of 10 µm. For limited installation space. For large measuring lengths. Magnetic scanning principle.
|
|
LIP 372 Incremental linear encoder with Very High Accuracy
|
|
LIP 382 The LIP-382 linear encoder permits measuring steps as small as 1 nanometer
|
|
LIP 471 Incremental linear encoder with Very High Accuracy for limited installation space with 5v TTL Quadrature Output
|
|
LIP 481 Incremental linear encoder with Very High Accuracy for limited installation space with 1Vpp Output
|
|
LIP 571 / 571C Incremental linear encoder with Very High Accuracy for large measuring lengths with 5v TTL Quadrature Output
|
|
LIP 581 / 581C Incremental linear encoder with Very High Accuracy for large measuring lengths with 1Vpp Output
|
|
LS 1679 Incremental Sealed Linear Encoder. Integrated wear-free roller guide with steel ball bearings on steel rod. Large mounting tolerances for connecting by coupling rod.
|
|
LS 177 / 177C Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 5v TTL Quadrature Output
|
|
LS 187 / 187C Incremental linear encoders for measurment to 0.5 µm
|
|
LS 328 / 328C Slimline linear encoder for limited installation space
|
|
LS 388 / 388C Slimline linear encoder for limited installation space
|
|
LS 477 / 477C Incremental Linear Encoder for Measuring Steps of 1 µm and 0.5 µm
|
|
LS 487 / 487C Incremental linear encoders for measuring steps of 1 µm and 0.5 µm (0.00005 in. to 0.00002 in.)
|
|
LS 628 / 628C Sealed Linear Encoders for Measuring Steps of 10 µm and 5 µm with 5v TTL Quadrature Output
|
|
LS 688 / 688C Sealed Linear Encoders for Measuring Steps of 10 µm with a 1Vpp output signal
|
|
MS 100 MS100 is HEIDENHAIN`s most economic stand for use with Specto and Metro gauges
|
|
MS 200 MS200 is HEIDENHAIN`s most commonly ordered granite stand for use with Specto, Metro and Certo gauges
|
|
MSE 1000 Multiplexor HEIDENHAIN`s NEW MSE 1000 Multipoint Gauging For Up To 250 Devises
|
|
MT 101K Length Gauge with 100mm measuring range
|
|
MT 101M Motorized plunger actuation; constant gauging force, 100mm Measuring Range
|
|
MT 1201 Rugged standard version with ball-guided plunger for radial forces up to 0.8 N; Plunger actuation by cable lifter or contact
|
|
MT 1271 Rugged standard version with ball-guided plunger for radial forces up to 0.8 N; Plunger actuation by cable lifter or contact
|
|
MT 1281 Rugged standard version with ball-guided plunger for radial forces up to 0.8 N; Plunger actuation by cable lifter or contact
|
|
MT 1287 The METRO MT 1287 is a Length Gauge with high repeatability and features a mesuring range of 12 mm.
|
|
MT 12B (Ball-Brush Guide) Rugged length gauge with plunger actuation by cable lifter or contact, ball-brush guides for increased plunger stability.
|
|
MT 12P (Pneumatic) Rugged length gauge with plunger actuation by introducing pneumatic pressure for hands-free measuring tasks.
|
|
MT 12W (Increased IP Rating) Rugged length gauge with plunger actuation by cable or contact with an increased resistance and protection from contamination. IP64 rating.
|
|
MT 25 Rugged length gauge with plunger actuation by cable lifter or contact
|
|
MT 2501 Rugged standard version like MT 1201, but for measuring ranges up to 25 mm (1 in.)
|
|
MT 2571 Rugged standard version like MT 2571, but for measuring ranges up to 25 mm (1in.)
|
|
MT 2581 Rugged standard version like MT 2581, but for measuring ranges up to 25 mm (1in.)
|
|
MT 2587 The METRO MT 2587 is a Length Gauge with high repeatability and features a mesuring range of 12 mm.
|
|
MT 25B (Ball-Brush Guide) Rugged length gauge with plunger actuation by cable lifter or contact, ball-brush guides for increased plunger stability.
|
|
MT 25P (Pneumatic) Rugged length gauge with plunger actuation by introducing pneumatic pressure for hands-free measuring tasks.
|
|
MT 25W (Increased IP Rating) Rugged length gauge with plunger actuation by cable or contact with an increased resistance and protection from contamination. IP rating 64.
|
|
MT 60K Free-moving plunger for connection to moving elements by coupling
|
|
MT 60M Motorized plunger actuation; constant gauging force, variable with three stages
|
|
ND 280 HEIDENHAIN`s newest LCD display for measuring and inspection stations
|
|
ND 287 HEIDENHAIN`s newest LCD display for measuring and inspection stations. Replaced most of the older single axis inspection displays, such as the ND 281.
|
|
New HEIDENHAIN ND 5023 New ND 5023 offers an innovative readout for TTL signals
|
|
New HEIDENHAIN ND 7013 New ND 7013 offers the most innovative readout on the market today!
|
|
PP 201 Incremental two-coordinate encoder for measuring steps of 1um to 0.05um with 11uApp Output
|
|
PP 271 Incremental two-coordinate encoder for measuring steps of 1um to 0.05um with 5v TTL Quadrature Output
|
|
PP 281 Incremental two-coordinate encoder for measuring steps of 1um to 0.05um with 1Vpp Output
|
|
PWM 20 Encoder Diagnostic Tool HEIDENHAIN now offers the PWM20, a compact, mobile diagnostic tool for all HEIDENHAIN signals
|
|
RCN 2310 New absolute angle encoder with a 20mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
|
|
RCN 2380 New absolute angle encoder with a 20mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder. Includes incremental signals.
|
|
RCN 2390F (FANUC Interface) Angle Encoders with Integral Bearing for FANUC Controls
|
|
RCN 2390M (Mitsubishi Interface) Angle Encoders with Integral Bearing for Mitsubishi Controls
|
|
RCN 2580 (EnDat2.2 Interface) Angle Encoders with Integral Bearing
|
|
RCN 2590F (FANUC Interface) Angle Encoders with Integral Bearing for FANUC Controls
|
|
RCN 5380 New absolute angle encoder with a 35mm through hole shaft, providing accuracies of +/-5 arc seconds. A laser calibration chart comes with this encoder.
|
|
RCN 5580 New absolute angle encoder with a 35mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
|
|
RCN 6310 (Endat 2.2 Interface) Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft
|
|
RCN 6390F (FANUC02 Interface) Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft
|
|
RCN 6390M (Mitsubishi Interface) Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft
|
|
RCN 8380 New absolute angle encoder with either a 60mm or 100mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
|
|
RCN 8390F (FANUC Interface) Angle Encoders with Integral Bearing for FANUC Controls
|
|
RCN 8510 New absolute angle encoder with either a 60mm or 100mm through hole shaft, providing accuracies of +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
|
|
RCN 8580 New absolute angle encoder with either a 60mm or 100mm through hole shaft, providing accuracies of +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
|
|
RCN 8590F (FANUC Interface) Angle Encoders with Integral Bearing for FANUC Controls
|
|
ROC 2310 Angle Encoder with Integral Bearing for Separate Shaft Coupling
|
|
ROC 2380 Angle Encoder with Integral Bearing for Separate Shaft Coupling
|
|
ROC 2390F (FANUC Interface) Angle Encoder with Integral Bearing for Separate Shaft Coupling
|
|
ROC 2390M (Mitsubishi Interface) Angle Encoder with Integral Bearing for Separate Shaft Coupling
|
|
ROD 1020 Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 5v TTL Quadrature output
|
|
ROD 1030 Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v HTL Quadrature output
|
|
ROD 1050 Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 11uApp output
|
|
ROD 1080 Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 1Vpp output
|
|
ROD 270 Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.001° with 5v TTL Quadrature Output and integrated 5x interpolation
|
|
ROD 280 Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.0005° with 1Vpp Output
|
|
ROD 420 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 5v TTL Quadrature output and clamping flange
|
|
ROD 426 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 5v TTL Quadrature output and synchro flange
|
|
ROD 430 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v HTL Quadrature output and clamping flange
|
|
ROD 436 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v HTL Quadrature output and synchro flange
|
|
ROD 450 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 11uApp output and clamping flange
|
|
ROD 456 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 11uApp output and synchro flange
|
|
ROD 466 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v TTL Quadrature output and synchro flange
|
|
ROD 480 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 1Vpp output and clamping flange
|
|
ROD 486 Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 1Vpp output and synchro flange
|
|
ROD 780 Large incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05° with 1Vpp Output
|
|
ROD 880 Large ultra high accuracy incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05° with 1Vpp Output
|
|
RON 225 Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.005° with 5v TTL Quadrature Output
|
|
RON 275 Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.001° with 5v TTL Quadrature Output and 5x integrated interpolation
|
|
RON 285 Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0005° with 1Vpp Output
|
|
RON 287 Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001° with 1Vpp Output
|
|
RON 785 Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001° with 1Vpp Output
|
|
RON 786 Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001° with 1Vpp Output
|
|
RON 886 Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 05° with 1Vpp Output
|
|
RON 905 Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 01° with 11uApp Output
|
|
RPN 886 RPN Angle encoder with integral bearing, hollow shaft and integrated stator coupling
|
|
Signal Adapter HEIDENHAIN singal adatpters take in the newer 1Vpp signal and convert it back to the older 11uApp.
|
|
ST 1207 Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
|
ST 1208 Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
|
ST 1277 Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
|
ST 1278 Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
|
ST 1287 Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
|
ST 1288 Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
|
ST 3007 Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
|
|
ST 3008 Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
|
|
ST 3077 Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
|
|
ST 3078 Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
|
|
ST 3087 Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
|
|
ST 3088 Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
|
|
TS 220 TS 220 Workpiece Touch Probe with cable connection
|
|
TS 230 TS 230 Workpiece Touch Probe with cable connection
|
|
TS 440 TS 440 Workpiece Touch Probe with infrared transmission
|
|
TS 640 TS 640 Workpiece Touch Probe with infrared transmission
|
|
TT 130 TT 130 Tool Touch Probe fastening with fixing clamps or mounting base (available as an accessory)
|
|
VM 182 The VM 182 Comparator System is for measuring the positioning accuracy, repeatability, and guideway error of linear axes on manual and CNC-controlled machines
|
| |
| | | |
|
DA 300 Discontinued, Click Here DA 300 compressed air purge unit for HEIDENHAIN linear and rotary encodes
|
|
DBB 110 Ballbar Discontinued, Click Here The DBB Double Ball Bar is a telescoping double-ball-bar linear encoder for performing circular interpolation tests with large radii to inspect primarily the machine tool geometry
|
|
ERA 180 Discontinued, Click Here Exposed angle encoder without integral bearing for measuring steps 0.005° to 0.0005° with 1Vpp Output
|
|
ERM 120 Discontinued, Click Here Exposed incremental rotary encoder without integral bearing with 5v TTL Quadrature output and IP 66 protection
|
|
ERM 180 Discontinued, Click Here Exposed incremental rotary encoder without integral bearing with 1Vpp output and IP 66 protection
|
|
ERO 725 Discontinued, Click Here Exposed angle encoder without integral bearing for measuring steps 0.005° to 0.0005° with 11uApp Output
|
|
Hardinge HEIDENHAIN Lathe Package Discontinued, Click Here HEIDENHAIN Lathe Package for the Hardinge Tool Room Lathe
|
|
KGM 182 Discontinued, Click Here The KGM Grid Encoder is for performing circular interpolation tests with small radii and curved path tests, to inspect primarily the dynamic performance of a control
|
|
LB 302 / 302C Discontinued, Click Here Sealed Linear Encoders for Large Measuring Lengths with Analog Output
|
|
LC 181 Discontinued, Click Here Sealed Absolute Linear Encoders
|
|
LC 182 Discontinued, Click Here High positioning accuracy and traversing speed through single-field scanning
|
|
LC 191F Discontinued, Click Here High positioning accuracy and traversing speed through single-field scanning
|
|
LC 192F Discontinued, Click Here High positioning accuracy and traversing speed through single-field scanning
|
|
LC 192M Discontinued, Click Here High positioning accuracy and traversing speed through single-field scanning
|
|
LC 481 Discontinued, Click Here Absolute linear encoder for mesuring steps of 1 µm to 0.1 µm (0.000 05 in. to 0.000 005 in.)
|
|
LC 482 Discontinued, Click Here Absolute linear encoder for mesuring steps of 1 µm to 0.1 µm (0.000 05 in. to 0.000 005 in.)
|
|
LF 103 / 103C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps to 0.1 µm with 11uApp Output
|
|
LF 401 / LF 401C Discontinued, Click Here Slimline Sealed Linear Encoders for Measuring Steps to 0.1 µm with 11uApp Output
|
|
LF 481 / 481C Discontinued, Click Here Slimline Sealed Linear Encoders for Measuring Steps to 0.1 µm with 1Vpp Output
|
|
LIDA 101 / 101C Discontinued, Click Here Incremental linear encoders for high traversing speeds with 11uApp Output
|
|
LIDA 105 / 105C Discontinued, Click Here Incremental linear encoders for high traversing speeds and long traverses up to 30m with 11uApp Output
|
|
LIDA 107 / 107 C Discontinued, Click Here Incremental linear encoders for high traversing speeds and medium traverses up to 6m with 11uApp Output
|
|
LIDA 175 / 175C Discontinued, Click Here Incremental linear encoders for high traversing speeds and long traverses up to 30m with 5v TTL Quadrature Output
|
|
LIDA 177 / 177C Discontinued, Click Here Incremental linear encoder for measuring steps to 1µm with 5v TTL Output
|
|
LIDA 181 / 181C Discontinued, Click Here Incremental linear encoders for high traversing speeds with 1 Vpp Output
|
|
LIDA 185 / 185C Discontinued, Click Here Incremental linear encoders for high traversing speeds and long traverses up to 30m with 1Vpp Output
|
|
LIDA 187 / 187 C Discontinued, Click Here Incremental linear encoders for high traversing speeds and medium traverses up to 6m with 1Vpp Output
|
|
LIF 101 / 101C Discontinued, Click Here Incremental linear encoder for measuring steps of 1um to 0.1um with 11uApp Output
|
|
LIF 121 Discontinued, Click Here Incremental linear encoder for measuring steps of 1um to 0.1um with 5v TTL Quadrature Output and integrated 2x interpolation
|
|
LIF 171 Discontinued, Click Here Incremental linear encoder for measuring steps of 1um to 0.1um with 5v TTL Quadrature Output and integrated 5x or 10x interpolation
|
|
LIF 181 Discontinued, Click Here Incremental linear encoder for measuring steps of 1um to 0.1um with 1Vpp Output
|
|
LIP 401 Discontinued, Click Here Incremental linear encoder with Very High Accuracy for limited installation space with 11uApp Output
|
|
LIP 501 Discontinued, Click Here Incremental linear encoder with Very High Accuracy for large measuring lengths with 11uApp Output
|
|
LS 106 / 106C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 11uApp Output
|
|
LS 176 / 176C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 5v TTL Quadrature Output
|
|
LS 186 / 186C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 1 Vpp Output
|
|
LS 303 / 303C Discontinued, Click Here Slimline Sealed Linear Encoders for Measuring Steps of 10 µm and 5 µm with 11uApp Output
|
|
LS 323 / 323C Discontinued, Click Here Slimline Sealed Linear Encoders for Measuring Steps of 10 µm and 5 µm with 5v TTL Quadrature Output
|
|
LS 403 Discontinued, Click Here Heidenhain LS 403 slimline scale for CNC machine tools
|
|
LS 406 / 406C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 11uApp Output
|
|
LS 476 / 476C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 5v TTL Quadrature Output
|
|
LS 486 / 486C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 1 µm and 0.5 µm with 1 Vpp Output
|
|
LS 603 / 603C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 10 µm and 5 µm with 11uApp Output
|
|
LS 623 / 623C Discontinued, Click Here Sealed Linear Encoders for Measuring Steps of 10 µm and 5 µm with 5v TTL Quadrature Output
|
|
LS 903 Discontinued, Click Here Heidenhain LS 903
|
|
ND 120 Quadra-Chek Discontinued, Click Here A User-Friendly Metrology Digital Readout For Comparators and Microscopes
|
|
ND 221B Discontinued, Click Here The ND 221 B is offered for simple tasks at measuring and testing stations, but also for position display on X-Y tables.
|
|
ND 231B Discontinued, Click Here The ND 231 B is designed for two encoders. It calculates the sum and the difference of two measured values and displays either value.
|
|
ND 281B Discontinued, Click Here The ND 281 B serves as a universal display unit for linear and angular measurement with RS-232 Output.
|
|
ND 282B Discontinued, Click Here The ND 281 B serves as a universal display unit for linear and angular measurement with BCD Output.
|
|
ND 522/523 Discontinued, Click Here The ND522/523 LCD displays for manual mills and lathes accept standard TTL signals.
|
|
ND 710/750 Discontinued, Click Here Basic 2 or 3 axis Display for Milling with Conversational Programming Support for the Operator.
|
|
ND 720/760 Discontinued, Click Here High Resolution 2 or 3 axis Display for Milling.
|
|
ND 730/770 Discontinued, Click Here High Resolution 2 or 3 axis Display for Lathes.
|
|
ND1100 Quadra-Chek Series Discontinued, Click Here Digital readouts for simple positioning tasks with up to 4 axes inputs
|
|
ND1200 Quadra-Chek Series Discontinued, Click Here Digital readouts for optical comparators with up to 4 axes inputs.
|
|
ND1300 Quadra-Chek Series Discontinued, Click Here Digital readouts for convenient 2-D measurement acquisition.
|
|
ND2100 Gage-Chek Series Discontinued, Click Here Digital readouts for multipoint inspection apparatuses with up to 8 axes inputs
|
|
PT 8016 Discontinued, Click Here New PT 8016 display HEIDENHAIN`s most comprehensive six axis readout to date.
|
|
PT 855 Discontinued, Click Here Flat-Panel Position Display with Conversational Programming and Graphic Support for up to 4 Axes
|
|
PT 880 Discontinued, Click Here The New POSITIP Display with conversational guidance and contextual help on a flat screen, graphic features, program memory, Up to 6 axis
|
|
QUARDA-CHEK 3000 Discontinued, Click Here Metrology 2D readout for microscopes, profile projectors and video measuring machines
|
|
RCN 223F Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
RCN 223M Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
RCN 226 Discontinued, Click Here Compact absolute angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0000054° with 1Vpp and EnDat Output
|
|
RCN 723F Discontinued, Click Here Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 05° with 1Vpp and EnDat Output
|
|
RCN 727F Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
RCN 729 Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
RCN 823M Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
RCN 827F Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
RCN 829F Discontinued, Click Here An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
|
|
ROD 250 Discontinued, Click Here Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.0005° with 11uApp Output
|
|
ROD 260 Discontinued, Click Here Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.005° with 5v TTL Quadrature Output
|
|
ROD 282 Discontinued, Click Here Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.0001° with 1Vpp Output
|
|
ROD 700 Discontinued, Click Here Large incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05° with 11uApp Output
|
|
ROD 800 Discontinued, Click Here Large ultra high accuracy incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05° with 11uApp Output
|
|
RON 255 Discontinued, Click Here Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0005° with 11uApp Output
|
|
RON 705 Discontinued, Click Here Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001° with 11uApp Output
|
|
RON 706 Discontinued, Click Here Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001° with 11uApp Output
|
|
RON 806 Discontinued, Click Here Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 05° with 11uApp Output
|
|
ST 1201 Discontinued, Click Here Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
|
| |